The default poll interval of 300 seconds has been tested and found to be a good compromise in a configuration of about 110 switches/dimmers.įile with additional device types. Poll too often and you will overload the insteon network, leading to sluggish or no response when trying to send messages to devices. Smartenit ZBPLM on Linux: /dev/ttyUSB0,baudRate=115200 PLM on Linux: /dev/ttyS0 or /dev/ttyUSB0 The Insteon PLM or hub is configured with the following parameters: Parameter # Thing Configuration # Network Configuration The naming convention is Insteon Device AABBCC, where AA, BB and CC are from the Insteon device address. Upon proper configuration of the network bridge, the network device database will be downloaded.Īny Insteon device that exists in the database and is not currently configured is added to the inbox. The network bridge is not automatically discovered, you will have to manually add the it yourself. Insteon devices such as dimmers, keypads, sensors, etc. # Supported Things ThingĪn insteon PLM or hub that is used to communicate with the Insteon devices
Insteon switch as timer software#
The free HouseLinc software from Insteon can also be used for configuration, but it wipes the modem link database clean on its initial use, requiring to re-link the modem to all devices.
The openHAB binding supports minimal configuration of devices, currently only monitoring and sending messages.įor all other configuration and set up of devices, link the devices manually via the set buttons, or use the free Insteon Terminal (opens new window) software. all devices must be linked with the modem before starting the Insteon binding. The binding does not support linking new devices on the fly, i.e. The binding also supports sending and receiving of legacy X10 messages. Relevant messages from the Insteon network (like notifications about switches being toggled) are picked up by the modem and converted to openHAB status updates by the binding. The binding translates openHAB commands into Insteon messages and sends them on the Insteon network. The modem can also be connected via TCP (such as ser2net. The Insteon PowerLinc Controller (Model 2414U) is not supported since it is a PLC not a PLM.
Insteon switch as timer serial#
The modem can be connected to the openHAB server either via a serial port (Model 2413S) or a USB port (Model 2413U. This binding provides access to the Insteon network by means of either an Insteon PowerLinc Modem (PLM), a legacy Insteon Hub 2242-222 or the current 2245-222 Insteon Hub.
More about Insteon can be found on Wikipedia (opens new window). Insteon devices send messages either via the power line, or by means of radio frequency (RF) waves, or both (dual-band.Ī considerable number of Insteon compatible devices such as switchable relays, thermostats, sensors etc are available. Insteon is a home area networking technology developed primarily for connecting light switches and loads.
0 kommentar(er)
